PESD2CAN,215

• Bidirectional ESD Protection / TVS Diode array, Single Channel
• 24V Reverse Standoff and Working voltage, 28V Breakdown Voltage
• 41V Clamping voltage, 5A Peak Pulse current, 230W Peak Pulse Power
• 17pF Line Capacitance
• 3-Pin SOT-23 Surface-Mount package, 1.1mm Height
• -55C to +150C Operating range, 150C Maximum Junction Temperature
• RoHS and China RoHS compliant, Tape and Reel (3, 000 per reel)

The PESD2CAN,215 is a Nexperia bidirectional ESD protection / TVS diode array with a 24V reverse standoff voltage, 28V breakdown voltage and a 41V clamping voltage, supplied in a 3-pin SOT-23 package. It absorbs a 5A peak pulse current at 230W of peak pulse power and presents 17pF of line capacitance. A TVS diode sits in parallel with the protected line and stays high-impedance below its standoff voltage, then conducts hard above breakdown to clamp transients away from downstream silicon. Nexperia lists the part at Production lifecycle status, RoHS and China RoHS compliant (REACH SVHC: yes), rated -55C to +150C and supplied on tape and reel at 3, 000 pieces.

Bidirectional TVS arrays at this standoff voltage protect differential bus lines that idle around a common-mode voltage and swing both directions, most commonly CAN and CAN FD transceivers in automotive and industrial networks, plus LIN, RS-485 and other exposed field-bus interfaces. Protection is placed at the connector so ESD strikes, load-dump transients and cable-coupled surges are clamped before they reach the transceiver. The -55C to +150C rating suits under-hood and outdoor installations. Buyers are automotive tier-one and tier-two suppliers, industrial network and drive manufacturers, and contract manufacturers sourcing Nexperia protection devices in reel volume.